Sanyu Weiye Microcomputer Controlled Electro Hydraulic Servo Steel Strand Testing Machine GAW-600B Type

GAW-600BThe microcomputer controlled electro-hydraulic servo steel strand testing machine can meet the standard testing requirements of the national regulations on steel strand tensile testing, and can obtain performance indicators such as tensile strength and elastic modulus of the tested material.
GAW-600BThe Type Micro Electro Hydraulic Servo Steel Strand Special Machine is a high-precision material testing equipment that uses hydraulic power source drive, electro-hydraulic servo control technology, computer data acquisition and processing, and can achieve closed-loop control and automatic detection. It consists of four parts: testing host, oil source (hydraulic power source), measurement and control system, and testing instruments,zuiLarge experimental force600kNThe accuracy level of the testing machine is better than1Grade.
GAW-600BThe microcomputer controlled electro-hydraulic servo steel strand testing machine can meet the standard testing requirements of the national regulations on steel strand tensile testing, and can obtain performance indicators such as tensile strength and elastic modulus of the tested material.
The testing machine is a six column, dual space structure, with a tensile space between the upper and lower crossbeams,The space between the lower crossbeam and the test bench is compressed, and the test space is automatically adjusted by driving the lower crossbeam up and down through the rotation of the sprocket and screw nut. Hydraulic controlled clamping jaws are installed on the upper and lower crossbeams, and standard models can be equipped with specialized jaws for steel strands for tensile testing; The bottom end of the lower crossbeam of the standard model is equipped with an upper pressure plate, and the test bench is equipped with a lower pressure plate with a spherical structure, which can be directly used for compression testing.
The testing machine and its accessories comply withGB/T228TheGB/T2611TheGB/T3159Standard requirements.
GAW-600BTechnical parameters of microcomputer controlled electro-hydraulic servo steel strand testing machine
zuiLarge experimental force:600KN；
Accuracy level:1Grade;
Relative error of indication: ±1%；
Effective measurement range:1%-100%F•S(Full range without grading);
Deformation measurement range:1%-100%F•S；
Displacement measurement resolution:0.001mm；
Strain rate control adjustment range:0.00025/s-0.0025/s；
Control range for maintaining force, deformation, and displacement:0.3%-100%F•S；
Middle beam lifting speed:300mm/min；
Compression surfacezuiLarge spacing:900mm；
stretchzuiLarge spacing:900mm；
Effective distance between two vertical columns:455mm；
Piston stroke:200mm；
Piston movementzuiHigh speed:100mm/min；
Steel strand clamping diameter: Φ8mm–Φ18mm；
Size of upper and lower pressure plates: Φ225mm；
Host dimensions:1020mm×640mm×2650mm；
Oil source cabinet size:800mm×600mm×1600mm；
Total machine power2.2kW(Oil pump motor)1.5kW, lifting motor0.4kW）；
Weight of oil source tank:300kg；
Host weight: approximately3100kg.