Rubber electronic density meter

Rubber electronic density meterGP-300EIt can test the density and volume of solids, particles, strips, and floats,More commonly used in products such as rubber and plastic.称重精度0.01g-300gDensity accuracy0.001g/cm3.

Rubber electronic density meterGP-300EWhen measuring plastic pellet products, some common issues should be noted. Due to the different densities of plastic pellet products, there may be measurement errors of varying degrees, for the following reasons:

*;Due to the inherent reasons of the product, there aresomePlastic particles have needle like holes，This type of plastic particle needs to be accurately measured using alcohol. The measurement error of water is relatively large because it is difficult for water to flow into small holes. If the measurement error is still relatively large when using alcohol, it is recommended to measure it by pressing it into a sheet

second;Plastic particles with more burrs must be measured with attention to bubbles and cleaned with alcohol. The purer the alcohol, the higher the measurement accuracy.

third;When measuring particles,The measuring tennis ball needs to be cleaned with alcohol first to prevent the formation of bubbles that may affect accuracy.

Function:

It has a mixing ratio function and can directly display the% value for the development and research of new materials, as well as the selection of mixing ratios.

Equipped with upper and lower limit functions, it can determine whether the specific gravity of the test substance is qualified or not. Equipped with buzzer device

haveRS-232CComputer interface, easy to connectPCAnd the printer.

Adopting a large water tank design to reduce the error caused by the buoyancy of the suspension line.

Capable of outputting specific gravity and volume change rate functions(Can set time1、10、30The60SEC)

Specifications: