Roundness tester Y9025D

Roundness tester Y9025DDESCRIPTION：
The Y9025D roundness waviness meter is a low-speed roundness meter that uses a circular grating and an inductive sensor at 5 revolutions per minute. Suitable for measuring roundness and surface waviness of various axis workpieces and regular or irregular annular workpieces, it can provide numerical values of parameters such as concentricity, coaxiality, frequency spectrum analysis, flatness, parallelism, perpendicularity, etc. It can measure discontinuous surfaces and also measure parameters such as roundness, runout, single piece runout, and inter piece runout of motor commutators (rectifiers).
This instrument is mainly used for measuring the roundness and waviness of various bearing rings, inner and outer raceways in the bearing industry. Measure the roundness, waviness, concentricity, perpendicularity, parallelism, flatness of rolling elements such as various types of rollers and steel balls, as well as the roundness, waviness, concentricity, perpendicularity, parallelism, flatness of oil pump nozzles, hydraulic components, textile machine accessories, etc., and perform spectral analysis on the surface state of the measured contour. Suitable for use in the workshop metrology room (no constant temperature requirement). It can be directly used for machine tool fault analysis, machine tool adjustment, part process analysis and testing, inter process inspection or final inspection of finished parts.
This instrument can use four evaluation methods to evaluate roundness data and draw graphs, and the measurement data can be saved and archived.

Roundness tester Y9025DTesting function:
1. It can measure the roundness, waviness, concentricity, perpendicularity, parallelism, and flatness of non continuous surface rotating bodies
(Four methods can be used to evaluate roundness error)
2. Automatic recognition of contour interruptions and automatic removal function. Spectral analysis can be performed on the surface state of parts.
3. Can provide the eccentricity and phase of the parts.

Roundness tester Y9025DTechnical performance:
1. Spindle accuracy: ± 0.02 µ m
2. Measurement range: Maximum outer diameter of 200mm (can be customized to ≥ 250mm)
Minimum inner diameter of Ø 3mm, maximum measurement height of 150mm, maximum weight of the tested component of 15kg
3. System accuracy: 0.06 µ m
4. Range ≤ 400 µ m
5. Power supply: AC single-phase 220V 50Hz 250W
6. Gas source pressure: ≥ 0.5Mpa