-
E-mail
827533686@qq.com
-
Phone
13538957285
-
Address
33 Xiaoping South Road, Baiyun District, Guangzhou City, Yiying Industrial Zone
Product Categories
Guangzhou Xiangfeng Electromechanical Equipment Co., Ltd
Practical hot air heater
NegotiableUpdate on 10/20
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Practical hot air heater
Product Details
The switch and temperature control part can be remotely installed (with additional connectors) for easy control.
The economical hot air heater adopts international brand electrical main controls (such as PID thermostat, SSR， Circuit breakers, intermediate relays, etc.), PID temperature controllers with an accuracy of ± 0.5%
The practical hot air heater adopts domestic brand electrical main controls (such as PID thermostat, SSR， Circuit breakers, intermediate relays, etc. The precision of PID temperature controller is ± 0.5%
The comparison between Baofeng hot air heater and general hot air heater is shown in the following table:
|
Serial number |
Baofeng hot air heater |
General hot air heater |
|
1 |
Using non-magnetic nickel chromium wire, free of iron, to avoid oxidation and burning |
Containing iron heating wire, prone to oxidation and burning |
|
2 |
The heating wire is suspended and hidden inside the ceramic cavity, allowing hot air to pass evenly through both sides of the heating wire, resulting in a large air volume, low air resistance, and lower temperature of the heating wire |
The heating wire is tied to the ceramic pillar, and the hot air passes through from one side with less air volume and high air resistance, while the temperature of the heating wire is higher |
|
3 |
The heating wire core adopts a lower surface power density design, so the service life of the heating wire is longer |
Electric heating wire has a high surface power density, is prone to aging, and has a short service life |
|
4 |
Equipped with an over temperature protection device to prevent the electric heating wire from breaking due to dry burning, and a temperature control device to adjust the outlet air temperature |
Most air heaters do not have this function to prevent dry burning and breakage |
|
5 |
Can be used continuously for a long time |
Most air heaters cannot achieve this |
Model Description:
Example: HWT-3P-1-006-11 (Practical hot air blower, electric heating power of 3KW, single-phase 220V power supply, motor 60W, Type 1 chassis)
|
model |
HWT-3P1- 006-11 |
HWT-5P3- 006/018-12 |
HWT-7.5P3- 018/025-21 |
HWT-10P3- 018/025/037-22 |
HWT-15P3- 018/025/037-23 |
|
Electric heating power |
3kW |
5kW
|
7.5kW |
10kW |
15kW |
|
fan power |
40/60 |
60/180 |
180/250 |
180/250/370 |
180/250/370 |
Fan parameter table
|
fan power |
40W |
60W |
180W |
250W |
370W |
|
Maximum Airflow |
2.5m3/min |
4.2m3/min |
6.5m3/min |
8.4m3/min |
11m3/min |
|
maximum wind pressure |
250Pa |
410Pa |
450Pa |
850Pa |
850Pa |
Equipped with an additional 3-meter power cord
Other power sources suitable for voltage or frequency can be configured, and there are also multiple types of nozzles available for selection.
Notes:
1) When installing the fan, it should not face downwards more than 10 degrees;
2) When turning off the hot air, you must first turn off the electric heating, and then wait for the hot air to cool down to below 60 ℃ before turning off the fan.
HWT Practical Hot Air Heater Outline Dimensional Drawing
Type 1 chassis size diagram
Type 2 chassis size diagram
