PWK Strong Wind Knife

Using stainless steel as the blade body, the straight drawn aluminum alloy is processed into blades, which not only maintain hardness and strength, but also ensure reliable precision;

It is composed of an air intake duct, a splitter plate, a gradually narrowing ventilation area, a narrow air duct, and other structures, which are particularly outstanding for their low air resistance and average wind speed.

The air inlet can be adjusted to a very small amount (0.3mm) to reduce the required traction air volume.

In addition to air compressors, vortex fans can also be used as induced draft fans to reduce power consumption.

Pressure resistance of 2kgf/cm2, maximum wind speed of 200m/s, temperature resistance of 250 ℃, can be connected to a heater to blow hot air.

The air outlet can be adjusted in width (6-8mm) to enhance air flow, with a length of up to 2m (customized up to 3m).

The wind volume of the strong wind type blade is several to ten times stronger than that of the standard type.

Multiple air inlet diameters are available to meet different air volume requirements, with three air inlet options on both sides, front, back, and top for easy installation.

In addition to being used for cooling and drying by blowing water, it can also be used as an isolation air curtain to reduce the loss of cold/hot air.

Model specifications of strong wind blade:

matters needing attention:

Be careful not to collide with the cutting edge, and use a medium that does not contain coarse impurity particles to avoid blocking the cutting edge

Or damaged;

The width of the air outlet has been calibrated according to the customized requirements when the product leaves the factory. If it is necessary to make changes, please deliver it to the original merchant or specialist

Industry professionals conduct calibration to avoid weakening the performance of their own calibration products.

If there are any changes to the design or materials, the latest revision shall prevail without further notice.

CAT0805/ MC/ AA-1

Dimensional drawing of AA strong wind blade series

AA-S1 Strong Wind Blade Size Description

AA-S2 Strong Wind Blade Size Description

AA-T1 Strong Wind Blade Size Description

If there are any changes to the design or materials, the latest revision shall prevail without further notice.

CAT0805/ MC/AA-2

AA Strong Wind Knife Series

AA-T2 Strong Wind Blade Size Description

AA-T3 Strong Wind Blade Size Description

Size Description of AA-B1 Strong Wind Blade

If there are any changes to the design or materials, the latest revision shall prevail without further notice.

CAT0805/ MC/AA-3

AA Strong Wind Knife Series

AA-B2 Strong Wind Blade Size Description

Size Description of AA-B3 Strong Wind Blade

Usage suggestion:

Rapid water removal, wind speed: 70~120m/s

Air outlet width: 1-1.5mm

General water removal, wind speed: 50~80m/s

Air outlet width: 1-1.5mm

Drying of water-based coating, wind speed: 40m/s

Air outlet width: 5mm

Steam sterilization, wind speed: 70~150m/s

Air outlet width: 0.3mm

Hot air drying, wind speed: 20~60m/s

Air outlet width: 2~5mm

Temperature: 60 ℃~150 ℃

Hot air rapid drying, wind speed: 60~80m/s

Air outlet width: 2~5mm

Temperature: 150 ℃~250 ℃

Number of inlet ports and adjustable range of outlet ports for strong wind blades:

If there are any changes to the design or materials, the latest revision shall prevail without further notice.