Mobile welding smoke purification equipment

1、 Scope of application:
This product is widely used in various welding (arc welding, carbon dioxide shielded welding, MAG welding, carbon arc gas gouging welding, gas fusion cutting, special welding, etc.), polishing, cutting, grinding and other places to purify the smoke and dust generated, as well as for the recycling of rare metals and precious materials.
2、 Working principle:
The smoke generated during the production and operation of the mobile welding smoke purification equipment at Henan Environmental Protection Equipment Factory is sucked into the mobile welding smoke purifier through the suction hood due to the gravity of the fan. Firstly, it passes through the flame arrester at the inlet of the purifier, which can separate and intercept large particles and Mars particles generated by polishing. The initially filtered smoke passes through the filter protection plate, further blocking particles and residual Mars. The filtered smoke enters the main filter element, which is made of imported anti-static coated polyester fiber material with a filtration efficiency of 99.9%. The purified gas is further purified by activated carbon filter cotton and discharged through the outlet to meet the standard
3、 Product advantages:
1. The purifier shell has undergone spray coating treatment, making it beautiful and elegant. The bottom is equipped with four universal rubber wheels, which can ensure free movement in the workplace Advanced fan design, high air volume, low power consumption.
3. The suction hood can be extended along with the suction arm to any desired position. It can be equipped with a flexible suction arm or two flexible suction arms. The suction arm can move freely 360 ° and can suck out smoke from the place where it occurs, greatly improving the collection rate of smoke and ensuring the health of the workers.
4. The filter cartridge is made of anti-static laminated polyester fiber material, which has higher adsorption performance and better safety, with a filtration effect of>99.9% Long service life, capable of absorbing dust particles up to 0.3 μ m.
6. Backblowing device: manually remove the filter cartridge and clean the dust, or connect the air compressor for semi-automatic dust cleaning.
7. Clean air is evenly guided and dispersed from the grille shaped exhaust outlet direction, and special soundproof cotton is built into the casing to minimize noise.
4、 Equipment Description (Taking Automatic Dust Cleaning Type as an Example)
1. Connect the exhaust pipe of the air pump to the inlet of the oil-water separator to ensure that the pipeline is sealed; 2. Connect the power and the indicator light will turn on;
3. Turn the start switch to position I and the motor will start;
4. Adjust the dust collection hood to the welding station, with a distance of about 30cm for better dust collection effect; After working for a period of time (8 hours), press the spray button once to clean the filter cartridge and achieve good filtering effect; After one week of work, open the dusty drawer and clean the dust.