Mobile bucket lid lifting pneumatic mixer HXTBCM 1) Product introduction: Product model: HXTBCM Product name: Mobile bucket lid lifting pneumatic mixer is suitable for mixing and dispersing chemical liquids such as paint, ink, cosmetics, etc. in 20-50L buckets. Standard lifting height: After lifting, the impeller is 350mm above the ground (can be customized according to customer bucket requirements). It is equipped with a stainless steel pressure film bucket lid to prevent impurities from entering the liquid material. The pressure film barrel cover is easy to clean and does not leave any liquid residue. With a diaphragm pump, it can pump flowing liquids and transport some non flowing media. 2) Product features: 1. The pneumatic mixer can have stepless speed regulation. 2. Pneumatic mixers can rotate in both forward and reverse directions. 3. The working environment of the pneumatic mixer is not affected by vibration, high temperature, electromagnetic, radiation, etc. It is suitable for harsh working environments and can work normally under unfavorable conditions such as flammability, explosiveness, high temperature, vibration, humidity, dust, etc. 4. The pneumatic motor matched with the pneumatic mixer has overload protection function and will not malfunction due to overload. 5. Pneumatic mixers have high starting torque and can be started directly with a load. 6. Pneumatic mixers are easy to operate, maintain, and repair. Pneumatic motors have a simple structure, small size, light weight, and high horsepower. They use air as the medium, making them easy to operate and maintain. 3) Purpose: Pneumatic mixers are mainly used in industries with explosion-proof requirements, such as petroleum, chemical, coating, paint, woodworking, food, daily chemical and other flammable and explosive, dust, heavy load, humid and other workplaces. 4) Attention: The maintenance and inspection of the mixer have a significant impact on its service life and performance. To fully utilize its performance, it is necessary to use clean and dry compression .....
