-
E-mail
hushanfamen@126.com
- Phone
-
Address
No.2 Xincheng Road, Nicheng Town, Pudong New Area, Shanghai
Product Categories
Hushan Valve Manufacturing (Shanghai) Co., Ltd
Internal thread electric ball valve
NegotiableUpdate on 02/27
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Internal thread electric ball valve is suitable for situations where two positions are cut off and adjusted. The connection between the valve and the actuator adopts a direct connection method. The electric actuator has a built-in servo system and does not require a separate servo amplifier. It can control the operation by inputting a 4-20mA signal and a 220VAC power supply. It has the advantages of simple connection, compact structure, small size, light weight, low resistance, stable and reliable action. The actuator can be configured with electronic electric actuators such as UNIC, PSQ, HQ, DHL, or pneumatic piston actuators such as GTX and AL according to user requirements.
Product Details
Product Name：
Internal thread electric ball valve
Product Model：
Q911
Drive Type：
electric
connection type：
internal thread
structural form：
through-type
sealed structure：
Soft seal, hard seal
pressure range：
1.6～10.0MPa
Nominal Diameter：
DN10-DN100
Common materials：
Carbon steel, stainless steel
Technical Consulting：
1、 Overview of Internal Thread Electric Ball Valve
Internal thread electric ball valveSuitable for situations where two are cut off or adjusted. The connection between the valve and the actuator adopts a direct connection method,Electric actuatorBuilt in servo system, no need for additional servo amplifier, input4-20mASignal and220VACThe power supply can control the operation. It has the advantages of simple connection, compact structure, small size, light weight, low resistance, stable and reliable action. The execution mechanism can be configured separately according to user requirementsUNICThePSQTheHQTheDHLEquivalent electronic electric actuator orGTXTheALPneumatic piston actuator.
2、 Internal thread electric ball valve execution standard
1Design and Manufacturing:GB12237-89TheAPI608TheAPI 6DTheJPI 7S-48TheBS5351TheDIN3357.
2Structural length:GB12221-89TheANSI B16.10TheJIS B2002TheNF E29-305TheDIN3202.
3Main Test Inspection:JB/T 9092TheAPI 598.
3、 Internal thread electric ball valve specifications and parameters of electric ball valve
|
CXTechnical parameters of series execution mechanism |
Valve body parameters |
|||
|
power supply |
AC200/220V，50/60Hz |
Nominal Diameter |
DN10～100mm |
|
|
output torque |
50N·M～2000N·M |
Nominal Pressure |
PN1.6 2.5 4.0 6.4 31.5MPa(定制) |
|
|
Action range |
0～90° 0～360° |
leakage |
Soft seal:Zero leakage |
hard seal:≤Rated flow rate10-5 |
|
Action Time |
15second/30second/60second |
actuator |
Can be equipped separatelyPSQTheHQTheUNICThe361RSWaiting series |
|
|
protective device |
overheat protection |
flow characteristics |
Quick opening feature |
|
|
ambient temperature |
-30°～60° |
adjustable range |
DN10-80 |
|
|
250:1 |
||||
|
manual operation |
Comes with a handle for operation |
Basic error |
±1% |
|
|
limit stop |
Electrical and mechanical dual limit |
dead zone |
≤1% |
|
|
Protection level |
equivalent toIP-65 |
backlash |
≤1% |
|
|
Position measurement |
Optional switch or potentiometer |
Applicable Temperature |
sealing surface |
|
|
drive motor |
8W/E |
PTFE≤150℃ RTFE≤180℃ PPL≤300℃ |
||
|
Incoming interface |
PE1/2Incoming line lock |
|||
CXSeries actuators can directly receive outputs from computers or industrial instruments4～20mADCor1～5VDCControl signal,220VACpower supply,Intelligent step adjustment of the actuator drive motor based on the deviation between the valve position feedback signal and the set value(PIDadjust)To achieve precise positioning of valve or other device openings that are compatible with the actuator, while outputting4～20mADCThe position feedback signal. Its core control component, the electronic servo controller, applies modern digital technology toDCS/PLCDesigned with standardization, it integrates signal acquisition, processing, feedback, and control. Adopting a unique electronic braking circuit and adding a mechanical damping device to eliminate inertia, it can stop instantly without oscillation during positioning, and the positioning accuracy can reach0.3%The above. Controllable silicon output, fast action time, stable output, high reliability. Small size, lightweight and pleasant, reliable performance, simple matching, high flow capacity, especially suitable for occasions where the medium is viscous, contains particles, and has fiber properties. At present, this valve is widely used in industrial control coefficients in industries such as food, environmental protection, light industry, petroleum, papermaking, chemical engineering, teaching and research equipment, and power.
4、 Technical parameters and performance of internal thread electric ball valve
|
Test pressure（Mpa） |
Nominal pressure（Mpa） |
Pressure level（class） |
JIS(Mpa) |
|||||||
|
1.6 |
2.5 |
4.0 |
6.4 |
10.0 |
150 |
300 |
600 |
10K |
20K |
|
|
strength test |
2.4 |
3.8 |
6.0 |
9.6 |
15.0 |
3.1 |
7.8 |
15.3 |
2.4 |
3.8 |
|
Sealing Test |
1.8 |
2.8 |
4.4 |
7.0 |
11.0 |
2.2 |
5.6 |
11.2 |
1.5 |
2.8 |
|
airtightness test |
0.5～0.7 |
|||||||||
5、 Main component materials of internal thread electric ball valve
|
connection method |
Internal thread connection |
Welding connection |
|||||
|
Part Name |
Valve body and valve cover |
WCB |
CF8(304) |
CF8M(316) |
WCB |
CF8(304) |
CF8M(316) |
|
Sphere, valve stem |
2Cr13 |
0Cr19Ni9 |
OCr17Ni12Mo2 |
2Cr13 |
0Cr19Ni9 |
OCr17Ni12Mo2 |
|
|
Sealing ring, packing |
Enhanced polytetrafluoroethylene and para polystyrene |
||||||
|
Applicable working conditions |
Applicable Medium |
Water, steam, oil products, etc |
Corrosive media such as nitric acid |
Acetic acid and other corrosive media |
Water, steam, oil products, etc |
Corrosive media such as nitric acid |
Acetic acid and other corrosive media |
|
Applicable Temperature |
-29～180°C(Enhanced polytetrafluoroethylene)、-29～300°C(Para polystyrene) |
||||||
6、 Internal thread electric ball valve connection size and weight
|
|
|
Structural diagram of internal thread electric ball valve |
|
Nominal Diameter |
Internal thread connection |
Welding connection |
|||||||||
|
mm |
inch |
D |
E (mm) |
H |
pipe threadG |
B |
weight(Kg) |
size(mm) |
weight(Kg) |
||
|
E |
D1 |
D2 |
|||||||||
|
10 |
3/8 |
10 |
60 |
57 |
3/8″ |
95 |
0.34 |
70 |
10 |
18 |
0.32 |
|
15 |
1/2 |
15 |
75 |
68 |
1/2″ |
110 |
0.47 |
75 |
15 |
24 |
0.48 |
|
20 |
3/4 |
20 |
80 |
70 |
3/4″ |
110 |
0.68 |
90 |
20 |
28 |
0.68 |
|
25 |
1 |
25 |
90 |
80 |
1″ |
140 |
1.2 |
100 |
25 |
34 |
1.2 |
|
32 |
11/4 |
32 |
110 |
85 |
11/4″ |
140 |
1.9 |
110 |
32 |
41 |
1.9 |
|
40 |
11/2 |
38 |
125 |
100 |
11/2″ |
180 |
2.7 |
128 |
38 |
49 |
2.7 |
|
50 |
2 |
50 |
144 |
110 |
2″ |
180 |
3.9 |
154 |
50 |
62 |
3.8 |
|
65 |
21/2 |
64 |
186 |
130 |
21/2″ |
200 |
7.1 |
193 |
64 |
78 |
7.0 |
|
80 |
3 |
78 |
206 |
150 |
3″ |
250 |
11.5 |
222 |
78 |
94 |
11.4 |
|
100 |
4 |
98 |
240 |
170 |
4″ |
250 |
20.5 |
273 |
98 |
124 |
20.3 |
Similar Product Recommend
