ISW type horizontal centrifugal pump

NegotiableUpdate on 01/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ISW horizontal centrifugal pump is used for conveying clean water and other liquids with physical and chemical properties similar to clean water. It is suitable for industrial and urban water supply and drainage, high-rise building pressurized water supply, garden irrigation, fire pressure boosting, and equipment matching. The operating temperature T is ≤ 80 ℃.

Product Details

　　1. ISW type horizontal centrifugal pumpProduct features:

(1) Smooth operation: The excellent dynamic and static balance of the concentric impeller of the pump shaft ensures smooth operation and vibration.

(2) Drip proof: Hard alloy seals made of different materials ensure that there is no leakage during the transportation of different media.

(3) Low noise: The water pump under two low-noise bearings runs smoothly, with almost no noise except for weak motor noise.

(4) Low failure rate: The structure is simple and reasonable, and the working time of the whole machine is greatly improved.

(5) Easy to maintain: replace seals and bearings, simple and convenient.

(6) More land saving: The exit can be arranged in three directions: left, right, and up, which is convenient for pipeline layout and installation, saving space.

　　2. ISW type horizontal centrifugal pumpUsage conditions:

(1) The suction pressure is ≤ 1.0Mpa, or the high working pressure of the pump system is ≤ 1.6Mpa, that is, the pump suction inlet pressure+pump head is ≤ 1.6Mpa, and the pump static pressure test pressure is 2.5Mpa. Please specify the system working pressure when ordering. When the working pressure of the pump system is greater than 1.6Mpa, it should be separately stated when ordering. In order to use cast steel materials for the overcurrent components and connecting parts of the pump during manufacturing.

(2) Environmental temperature<40 ℃, relative humidity<95%.

(3) The volume content of solid particles in the conveyed medium shall not exceed 0.1% of the unit volume, and the particle size shall be less than 0.2mm

Note: If the medium used is with small particles, please specify when ordering so that wear-resistant mechanical seals can be used.