-
E-mail
Wenguihe@fzfldjdgs.com
- Phone
-
Address
16th Floor, Xinrixian Building, 98-1 Jiangbin East Avenue, Mawei District, Fuzhou City
Product Categories
Fuzhou Faraday Electromechanical Equipment Co., Ltd
Hydraulic pump gear pump OT20H-2
NegotiableUpdate on 09/24
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The structure of the hydraulic pump gear pump OT20H-2 gear pump includes a gearbox made of cast iron material G30. The installation flange and cover are also made of cast iron material. Due to this structure, gear pumps can be used under heavy working conditions and can transmit high hydraulic power. They also have excellent mechanical and volumetric efficiency, low noise levels, and provide optimal performance between flow pulsation and displacement. Describe two sets of European standard cast iron pumps, with a centering of 36.5mm and a tapered shaft ratio of 1:8. The displacement ranges from 4.10 to 25.10 cc/rev, with a working pressure of up to 280 bar. The center width of the flange 4 bolt installation is 71.5mm and 96.2mm downwards. SAE "A" standard gear pump spline shaft with 9 teeth 16/32 DP flat
Product Details
Hydraulic pump gear pump OT20H-2
The structure of the gear pump includes a gearbox made of cast iron material G30. The installation flange and cover are also made of cast iron material. Due to this structure, gear pumps can be used under heavy working conditions and can transmit high hydraulic power. They also have excellent mechanical and volumetric efficiency, low noise levels, and provide optimal performance between flow pulsation and displacement.
description
Two sets of European standard cast iron pumps, with a centering of 36.5mm and a tapered shaft ratio of 1:8. The displacement ranges from 4.10 to 25.10 cc/rev, with a working pressure of up to 280 bar. The center width of the bolt for installing flange 4 is 71.5mm, and it is 96.2mm downwards.
SAE "A" standard gear pump spline shaft with 9-tooth 16/32 DP flat root fit. The center of the bolt for installing flange 2 is 106.2mm. The displacement ranges from 4.10 to 25.10 cc/rev, and the working pressure can reach up to 280 bar.
Bronze thrust plates can be used for mining applications.
