Honeywell FS24X Multi Spectral Three Frequency Infrared Flame Detector

NegotiableUpdate on 05/17

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The FS24X new generation multispectral triple infrared flame detector is the crystallization of FIRE SENTRY's patented broadband infrared technology. The FS24X adopts 4.3-micron broadband infrared and visible light detection technology, proven software algorithms, and dual microprocessors to ensure the highest detection performance and the best false alarm immunity.

Product Details

Honeywell FS24X Multi Spectral Three Frequency Infrared Flame Detector Product Introduction:

The Honeywell Fire Sentry FS24X is a new generation of high-tech multispectral tri frequency (IR/IR/IR/Visible) infrared flame detector, and is one of the flame detector members in the FSX series that applies advanced technology. The Fire Sentry FS24X utilizes Honeywell's patented WideBand IR, WideBand 4.3 micron IR, and visible light detection technologies, achieving significant breakthroughs in flame and fire detection. The Fire Sentry FS24X features advanced software algorithms and is equipped with a dual core microprocessor, ensuring its optimal flame detection performance and anti false alarm processing.

Product features of Honeywell FS24X multispectral tri frequency infrared flame detector from the United States：

WideBandIR patented technology

Electronic Frequency Analysis patented technology;

Visible light sensors have the best anti false alarm function;

Detection sensitivity is optional;

Field of view: 110 ° wide field of view, 100 full cone of view (in addition to offering products with 90 ° wide field of view and 100 full cone of view);

Dual core microprocessor, reliable performance;

Real time clock, providing accurate time of occurrence of accidents;

FirePic: Storage and recording of fire event data;

Event log: with time and date;

RS485 interface;

Non isolated 420mA analog output (source or drain type);

Alarm, fault and fire confirmation relays;

Automatic optical path detection and circuit self-test;

Wide working temperature range;

Patent technology for plug-in electronic modules, used for component protection and easy on-site installation;

Two 3/4 "NPT or two 25mm electrical interfaces;

Low power consumption;

Resistance to RFI and EMI;

Passed FM, ATEX, and CE certifications;

Meets SIL2 requirements

Technical parameters of Honeywell FS24X multispectral tri frequency infrared flame detector product:

field of view	110 °, 100 full cone field of view; Central axis ± 55 ° or 90 °, 100 full cone field of view; Central axis ± 45 °
sensitivity	Extremely high, high, medium, low: adjustable through switches
response time	1 square foot n-heptane flame at 100 feet: 35 seconds; 1 square foot n-heptane flame at 200 feet: 310 seconds
Spectral sensitivity	Visible light: 400700 nanometers; Near infrared: 0.71.1 micrometers; Broadband infrared: 1.17 microns; Broadband infrared: 3.05.0 microns
working voltage	1832VDC, Rated 24VDC
power consumption	Normal: 56 mA Alarm: 106 mA Heater: 155 mA Note: When the temperature is 0oF (-17oC), the heater is turned on.
Output Relay	Alarm: SPDT (normally open/normally closed), open/close, locked/unlocked; Fault: SPDT (normally open), usually connected, locked/unlocked; Auxiliary: SPDT (normally open/normally closed), open/close, locked/unlocked; Contact rating: 1 A × 24 VDC
Analog Output	020 mA， Users can choose between source or drain type on their own
loop resistance	50400 ohms
digital communication	Users can choose one of the following options: RS-485, ModBus protocol; RS-485，FireBus II； RS-485 Special (optional); HART， Optional plug-in module
Indication signal	Blue LED indicator light: power supply; Red LED indicator light: alarm; Yellow LED indicator light: malfunction;
temperature range	Job: -40+185oF (-40+85oC); Storage: -67+230oF (-55+110oC)
Humidity range	595RH， non-condensing
vibrate	Meets or exceeds MilSpec 810C Method 514.2 and Curve AW12 standards
wiring	14 AWG（2.5mm2）22 AWG（0.326mm2）， Suggest using shielded cables
electrical interface	Two 3/4 "NPT or two M25
Shell material	Cast aluminum or 316 stainless steel
protection grade	NEMA 4 & 4X，IP66
authentication	FM： Class I, Div. 1 & 2, Groups B, C, & D Class II, Div. 1 & 2, Groups E, F, & G Class III ATEX：II 2 G D Ex d IIC T4（Ta：-60+110oC），T5（Ta：-60+90oC），T6（Ta：-60+75oC） CE： Meets the requirements of EN6000-6-4 and EN50130-4 standards; SIL level: FMEDA complies with the safety requirements of IEC 61508.
weight	Cast aluminum: 3.6 lbs (1.6 kg); Stainless steel: 7 lbs (3.2 kg)
install	Rotating bracket (optional)