Garbage compression station

1、 Overview of Garbage Compression Station
1. Name: Horizontal Bar YQ100LJZC
2. Product category: Environmental sanitation machinery
3. Function description of the working device:
Firstly, the sanitation workers will pour the bulk garbage collected at the garbage transfer station into the compression box. When the garbage is loaded onto the upper surface of the compression box, the operator starts the hydraulic system to work. Under the action of the squeezing oil cylinder, the pressure head presses down on the garbage compression box, compressing the loose garbage in the garbage compression box into blocks. Due to the limitations of the garbage bin and press cylinder, the hydraulic system must be restarted by the operator after each press of the garbage by lifting the press head to the upper plane of the compression box. The pressure head presses the garbage inside the compression box again. This is a cyclic squeezing of garbage.
When the compressed garbage reaches a height of 1.1 meters, the operator operates the middle gate lifting button to activate the middle gate oil cylinder, lifts the middle gate, and then operates the push plate oil cylinder to return to its original state. The middle gate is then lowered for the next round of garbage squeezing. After the second piece of garbage is pressed, the operator starts the hydraulic system, operates the hanging box lifting button to lower the pressure head to the hanging box position, and then operates the hanging box button to make the hanging box oil cylinder work. The hanging box sliding pin on the pressure head is inserted into the four lifting rings on the garbage compression box. Then operate the lift button to lift the pressure head up the trash can. After lifting to a height above the bottom of the garbage transport truck compartment, use the front and middle gate lifting buttons to lift the front and middle gates.
Pour back the garbage transport vehicle that has already opened the back door, allowing the front end of the garbage bin to partially enter the garbage truck's large bin. The operator operates the push plate button to push the two pieces of garbage that have been compressed into blocks into the car's large bin.
After the garbage truck has driven away, lower the front and middle gates on the garbage bin. Then use a high-pressure water gun to clean the garbage on the protruding platform in the pit, and then put the garbage bin into the pit. Then retract the sliding pin of the hanging box and lift the pressure head. Preparing to enter the next cycle of compressing garbage.
2、 Main functional characteristics of garbage compression station
1. Vertical compression method: high compression force, dense compression ratio, and high daily processing capacity; 2. The advanced microcomputer PLC control system has various automatic operation functions such as compression, lifting, and loading, which is conducive to significantly reducing labor intensity, effectively improving labor efficiency, and greatly improving the working environment; 3. Garbage is compressed to remove moisture from the garbage, avoiding sewage leakage during transportation and preventing secondary pollution; 4. Easy to manage and improve the utilization rate of the garbage dump;
5. Compliant with national environmental protection, achieving enclosed garbage transportation, effectively avoiding garbage spillage and dripping, greatly improving the working environment, and promoting the harmonious and sustainable development of the economy and society; 6. The daily garbage throughput is large, making it easy to store and improving the working environment.
3、 Overall composition and equipment of garbage compression station
Garbage bin, hydraulic system, automatic sewage system, microcomputer PLC electrical control system, spray dust reduction and deodorization system, compression device, ejection device, safety device, fully hydraulic control storage box device.