GCF-5096AGCF-5096ACopper Corrosion Tester

GCFS-5096A Copper Corrosion TesterDetailed Introduction

GCFS-5096A Copper Corrosion TesterProduct Introduction:

This instrument is designed and manufactured in accordance with the requirements specified in the Chinese standard GB/T5096 "Copper Corrosion Test Method for Petroleum Products". It is suitable for evaluating the degree of copper corrosion caused by petroleum products such as aviation gasoline, aviation turbine fuel, vehicle gasoline, agricultural tractor fuel, washing solvents, kerosene distillate fuel, and lubricating oil according to the test method specified in this standard.

Technical parameters:
1Power supply voltage: AC (220 ± 10%) V, 50Hz;

2Temperature sensor: industrial platinum resistance, with a division number of Pt100;

3Temperature control range: freely set from room temperature to 100 ℃;

4Temperature control accuracy: ±1℃；

5Temperature display mode: LCD display;

6Temperature controlled heating power: 1600W；

7Time control range: 1 minute to 24 hours can be set arbitrarily;

84 sample wells;

9Number of measured samples: 4-12;

10Environmental temperature: room temperature~35 ℃;

11Relative humidity: ≤ 85％；

12Power consumption of the whole machine: not exceeding 1800W.

13External dimensions: four hundred and fortyMm x 330mm x 560mm (length x width x height).

Main features:

1. Using a liquid crystal display temperature controller, heater, and electric stirrer to form a constant temperature bath, the temperature inside the bath is uniform; The temperature controller also has a timing function, which is used for time control setting and automatic timing during sample testing, and will also give an alarm prompt at that time.

2. This instrument has 4 sample test holes, each hole can hold one test cartridge or 3 test tube samples for simultaneous testing, with high testing efficiency.

3. Equipped with standard color palettes imported from the United States, meeting the requirements for testing and comparison.