Flat membrane pressure transmitter

NegotiableUpdate on 06/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Name: Flat Membrane Pressure Transmitter Model: YD-341 Introduction: Flat Membrane Pressure Sensor The elastic body of the sensor is made of imported material, with diaphragm isolation technology and no pressure hole in the test head. There is no blockage caused by viscous media during the measurement process. The integrated structure design is suitable for pressure measurement and control of viscous media such as chemical coatings, paints, mud, asphalt, and crude oil

Product Details

Product Name: Flat Membrane Pressure Transmitter

Model: YD-341

Introduction:

The elastic body of the flush membrane pressure sensor adopts imported materials, membrane isolation technology, and the test head has no pressure hole. There is no blockage caused by viscous media during the measurement process, and the integrated structure design,

Application:
Suitable for pressure measurement and control of viscous media such as chemical coatings, paints, mud, asphalt, crude oil, etc.

Technical parameters of flat membrane pressure transmitter:

★ Range: 0~100MPa, optional range range range

★ Process connection: M20 × 1.5

★ Output signal: 4~20mA

★ Lead method: Cable (standard length 1m), aviation plug

★ Working voltage: 12~40V, standard 24VDC ± 5%, ripple less than 1%

★ Accuracy: 0.25% F.S, 0.5% F.S

★ Working temperature: -20 ℃~+80 ℃

★ Medium temperature: -25~85 ℃

★ Storage temperature: -40~125 ℃

Relative humidity: 0%~100%

★ Load resistance: current output: ≥ 800 Ω, voltage output: above 50K Ω

★ Insulation resistance: ≥ 2000 Ω (1000VDC)

★ Temperature effect: Maximum range ± 1.0% (compensation temperature: -10 ℃~+70 ℃)

★ Stability: 0.25%/F.S of maximum range

★ Overload pressure: 2 times the full range

★ Protection level: IP65

★ Shell material: 304 stainless steel

★ Weight: Approximately 0.3Kg

Flat membrane pressure transmitter options:

YD-341	Sanitary flat membrane pressure transmitter
	pressure type	Gauge pressure (G may not be labeled); Absolute pressure (A)
		Range	Measurement range
			See the table below
			code	Comprehensive accuracy (linear+repeatability+hysteresis)
			1	±0.4%FS
			2	±0.25%FS
			3	±0.1%FS
				Code name		Signal output
				A1		4~20mA
				V1		1~5V DC
				V2		0~5V DC
				V3		0.5~4.5V DC
					code		Additional features
					F1		M30x1.5 external thread
					F2		Clamp type
					F0		G1/2
					W1		Direct outgoing cable type (IP67, 2m)
					W2		Husman socket type (IP65, DIN43650)
					E		Intrinsic safety explosion-proof Ex iaIICT5

YD341 (0~100KPa) -1-A1-F1-W1 Sanitary Flat Membrane Pressure Transmitter