Electronic Solid Density Meter DST-A300

NegotiableUpdate on 04/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The stable range of electronic solid density meter DST-A300 is 0.005g-300g; Density accuracy is 0.001g/cm3. The DST-A300 density meter is suitable for various solids, particles, and floats, and can directly read the volume of objects; Used in industries such as rubber, plastic, wire and cable, food, composite materials, cosmetics, shoe materials, glass, precious metal hardware recycling, etc. The solid density meter DST-A300 adopts the Archimedes principle buoyancy method to accurately read the measured values directly.

Product Details

measuring method ：

1、After turning on, use it first100gWeight calibration instrument;

2、Place the rubber sample to be tested on the measuring table and press the button on the panelMemoryKey, memorize the weight of the test sample in the airW1；

3、Pick up the rubber sample with tweezers and wash it in a disposable water cup filled with alcohol(Try to wash for a while as much as possible, mainly to prevent bubbles from adhering to the surface of the rubber block when it is placed in water, which will affect the final measurement value)；

4、Use tweezers to pick up the rubber sample, lift up the measuring panel, and carefully place the sample to be tested into the water tank (if there are bubbles on the surface of the sample,Can be sucked off with a straw）Press againMemoryKey Memory Sample Water WeightW2，2～5The measured specific gravity value will be displayed in seconds.

Electronic solid density meterFunctions of DST-A300:

Equipped with temperature compensation settings and solution compensation settings, it offers more user-friendly operation and better meets the needs of on-site operations.

Equipped with RS-232C computer interface, it can easily connect PC and printer.

Adopting a large water tank design to reduce the error caused by the buoyancy of the suspension line.

When using corrosive liquids as media, an anti-corrosion water tank can be purchased as an option.

Electronic solid density meterParameters of DST-A300:

model:	DST-A300	DST-A600
Measurement range:	0.01g~ 300g	0.01~600g
Directly read:	Visual density, volume
Test type:	Solid, granular, thin film, floating body
Testing time:	About 5 seconds
Density range:	Both ＞ 1 and ＜ 1 can be tested
Density accuracy:	0.001 g/cm3

Standard attachments:

① Host ② water container ③ measuring platform ④ anti floating frame and particle container ⑤ windproof cover ⑥ power supply ⑦ tweezers ⑧ thermometer ⑨ calibration weight

Electronic solid density meterOperation steps of DST-A300:

① First, measure the weight of the product in the air and press the Memory button to store the memory.

② Put it back into the water and measure its weight. Press the MemoRY button to store and display the density and volume values.