-
E-mail
2909229930@qq.com
-
Phone
13306141112
-
Address
No. 180 Huaxing Road, Jintan Economic Development Zone, Jiangsu Province
Changzhou Yitong Analytical Instrument Manufacturing Co., Ltd
2909229930@qq.com
13306141112
No. 180 Huaxing Road, Jintan Economic Development Zone, Jiangsu Province
Water sampling equipment
Produced by Changzhou Yitong Analytical Instrument Manufacturing Co., LtdET-D18The underwater sampling equipment is very suitable for floating product layers(LNAPL)Obtain representative water samples below, as well as samples from the product layer(LNAPLandDNAPL)It can also be used to profile open water bodies, open drilling and filter wells, as well as collect samples from different water levels or inflow points. It can avoid cleaning and handling cleaning water. Directly sampling from a specific depth makes the collected water highly representative of the groundwater outside the well at that depth.
ET-D18
The underwater sampling equipment can obtain samples without contact with oil, and it is very suitable for oil on the water surface/The water sampling below the product layer is also easy to disassemble for purification.
Downstream sampler/Lower water quality sampler/water sampler
Type:ET-D18Standard configuration:
High pressure hand pump 1only Stainless steel scroll 1document (including pressure gauge)1Only)
handcart 1unit sampler 1only (Capacity:1.8Rising)
LDPEpipe 1Volume(150Meter with marked scale
ET-D18Operating principle of underwater sampling equipment:
The underwater sampling equipment is a stainless steel sampler, whichLDPEThe high-pressure polyethylene pipe is installed on a convenient stainless steel reel. The scroll has a pressure attachment for use on a high-pressure hand pump and a pressurization device/Emission switch, used to increase and decrease the pressure applied to the sampler.
2: Before placing the sampler into the well, a high-pressure hand pump should be used to pressurize the sampler to prevent water from flowing into it when it is lowered into the well. Once the required depth is reached, the pressure is released and the hydrostatic pressure directly pours the water in the sampling area into the sampler.
Three:1.8A floating check ball inside the upsampler can prevent water from entering the pipe, thus avoiding cleaning the pipeline.
When the sampler is filled, it can be re pressurized and lifted to the water surface. Use a sample release device that can control the flow rate and minimize sample release to transfer the sample.
Changzhou Yitong Analytical Instrument Manufacturing Co., Ltd
: Jiangsu Province mobile phone
net : www.kx17.net.com :