Welcome Customer !

Membership

Help

Changzhou Yitong Analytical Instrument Manufacturing Co., Ltd
Custom manufacturer

Main Products:

foodequippro>Products

ET-101 Inverted Water Harvester

NegotiableUpdate on 04/06
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The ET-101 inverted water sampler is suitable for routine hydrological, seawater chemistry, and microbiological investigations. Due to its simple structure, reliable operation, and convenient use, it is a commonly used water sampler in various countries. The ET-101 inverted water collector is equipped with two inverted temperature gauges attached to the water collector, which are used to record the temperature during water collection. By reading the two gauges, the depth of water collection can also be estimated.

Product Details

ET-101Inverted water collector

ET-101Inverted water collectorSuitable for routine hydrological, seawater chemistry, and microbiological investigations, due to its simple structure, reliable operation, and convenient use, it is a commonly used water sampler in various countries. Two inverted temperature gauges attached to the water collector are used to invert the water collector and record the temperature during water collection. By reading the two gauges, the depth of water collection can also be estimated.


The ET-101 inverted water sampler consists of a nickel plated device with valves at both endsMade of brass (or stainless steel) cylinder, with a total length of 65 centimeters and a volume of approximately 1 liter. The valves at both ends of the cylinder are adjusted for tightness by spiral springs. Two parallel levers are installed at the thicker ends of the two valves and connected by connecting rods, allowing the two valves to be opened and closed simultaneously. The water collector is fixed to the steel wire rope through the fixing clip at the lower end and the release device at the upper end, which is composed of an impact switch and a stopper. Before the water collector sinks into the designated water layer, the stopper buckles the upper end of the water collector onto the steel wire rope. When the hammer is dropped, it hits the switch, the stopper moves away, and the upper end of the water collector leaves the steel wire rope. The entire water collector rotates around the fixed clamp, and the two valves automatically close. When the water collector is reversed, the cone on the connecting rod moves behind the spring plate, making the valve more sealed. When the release device leaves the wire rope, make the hammer slide down along the wire rope and hit the small lever of the fixed frame, causing the * * hammer below to slide onto the impact switch of the next water collector, and the water collector below will automatically reverse. This repetition can cause the water collector to work upside down.



Changzhou Yitong Analytical Instrument Manufacturing Co., Ltd

: Jiangsu Province

Net: :

electricity Words:-82362388 :-