Cole parmer panel mounted flowmeter

NegotiableUpdate on 03/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

■ Front cover screen, can enlarge the scale by 16%, more conducive to accurate reading ■ Molten ceramic scale, can permanently accurate reading ■ Longitudinal tangent positioning line, indicating reading accuracy like a hair, accurate aluminum flowmeter is cheap and very suitable for use in conventional flow measurement of non corrosive gases and liquids. Equipped with a 150 mesh entrance mesh screen. Brass flow meters are cost-effective and suitable for use in water. Equipped with a 150 mesh entrance mesh screen. 316 stainless steel (SS) flow meters can withstand higher temperatures and pressures; And it has excellent chemical compatibility. Equipped with a 150 mesh entrance mesh screen. A flow meter with a flow valve is equipped with a flow regulating valve at the inlet (bottom). This design is very suitable for measuring the flow rate of liquids and gases under positive pressure conditions. In vacuum applications, flow valves are generally installed at the outlet (top) of the flow meter.

Product Details

Cole parmer panel mounted flowmeter

Unique numerous advantages, cost-effective

The front cover screen can enlarge the scale by 16%, which is more conducive to accurate reading

■ Molten ceramic scale, capable of permanent and accurate reading

■ Longitudinal tangent positioning line, indicating reading accuracy as precise as a hair

Aluminum flow meters are inexpensive and highly suitable for routine flow measurement of non corrosive gases and liquids. Equipped with a 150 mesh entrance mesh screen.

Brass flow meters are cost-effective and suitable for use in water. Equipped with a 150 mesh entrance mesh screen.

316 stainless steel (SS) flow meters can withstand higher temperatures and pressures; And it has excellent chemical compatibility. Equipped with a 150 mesh entrance mesh screen.

A flow meter with a flow valve is equipped with a flow regulating valve at the inlet (bottom). This design is very suitable for measuring liquids under positive pressure conditions

The flow rate of body and gas. In vacuum applications, flow valves are generally installed at the outlet (top) of the flow meter.

parameter

Accuracy: ± 5% of full scale

Reproducibility: ± 0.25% of full scale

Minimum flow rate: approximately 10% of the maximum flow rate (see table below)

Maximum pressure: 13.8 bar

Operating temperature: -26~121 ° C

Connector: 1/8 'NPT (female)

Materials of each component

component	aluminium	brass	316 SS
Flow tube	borosilicate glass
Connectors, valves	aluminium	Chrome plated brass	316 SS
O-shaped gasket	Nitrile rubber		Viton®
float	Glass, 316 SS, tungsten carbide hard alloy, sapphire, or tantalum
rack	Aluminum, acrylic, polycarbonate

Triangular support

Install up to 3 flow meters simultaneously in any combination. The transparent acrylic box is embedded with 3 horizontal adjustment screws and an alcohol level meter

Item Number	Number of flow meters that can be installed
03226-10	1
03226-30	1, 2 or 3

65 mm direct reading flowmeter

Maximum flow velocity	Flow meter without flow valve				Flow meter with flow valve
	Float ‡	Aluminum connector †	Brass connector †	316 SS connector †	Aluminum connector †	Brass connector †	316 SS connector †
	Float ‡	Item Number	Item Number	Item Number	Item Number	Item Number	Item Number
air flow meter
7 mL/min	G	32010-15	32011-15	32012-15	32013-15	32014-15	32015-15
50 mL/min	SS	32010-01	32011-01	32012-01	32013-01	32014-01	32015-01
100 mL/min	G	32010-03	32011-03	32012-03	32013-03	32014-03	32015-03
250 mL/min	C	32010-05	32011-05	32012-05	32013-05	32014-05	32015-05
500 mL/min	C	32010-07	32011-07	32012-07	32013-07	32014-07	32015-07
1.0 LPM	G	32010-09	32011-09	32012-09	32013-09	32014-09	32015-09
2.0 LPM	SS	32010-11	32011-11	32012-11	32013-11	32014-11	32015-11
5.0 LPM	G	32010-13	32011-13	32012-13	32013-13	32014-13	32015-13
10.0 LPM	SS	32010-17	32011-17	32012-17	32013-17	32014-17	32015-17
16.0 LPM	SS	32010-16	32011-16	32012-16	32013-16	32014-16	32015-16
2.2 scfh	G	32010-18	32011-18	32012-18	32013-18	32014-18	32015-18
6.0 scfh	G	32010-19	32011-19	32012-19	32013-19	32014-19	32015-19
10.0 scfh	SS	32010-21	32011-21	32012-21	32013-21	32014-21	32015-21
25.0 scfh	SS	—	—	—	32013-23	32014-23	32015-23
50.0 scfh	SS	—	—	—	32013-24	32014-24	32015-24
90.0 scfh	SS	—	—	—	32013-27	32014-27	32015-27
1.9 scfm	SS	—	—	—	32013-28	32014-28	32015-28
water flow meter
0.5 mL/min	G	32010-29	32011-29	32012-29	32013-29	32014-29	32015-29
6.0 mL/min	SS	32010-31	32011-31	32012-31	32013-31	32014-31	32015-31
115 mL/min	SS	32010-33	32011-33	32012-33	32013-33	32014-33	32015-33
500 mL/min	G	32010-35	32011-35	32012-35	32013-35	32014-35	32015-35
750 mL/min	SS	—	—	—	32003-09	32004-09	32005-09

150 mm direct reading flowmeter

Maximum flow velocity	float‡	Flow meter without flow valve			Flow meter with flow valve
		Aluminum joint†	brass fitting†	316 SS connector†	Aluminum joint†	brass fitting†	316 SS connector†
		Item Number	Item Number	Item Number	Item Number	Item Number	Item Number
air flow meter
25 mL/min	Sa	32030-00	32031-00	32032-00	32033-00	32034-00	32035-00
50 mL/min	Sa	32000-00	32001-00	32002-00	32003-00	32004-00	32005-00
75 mL/min	C	32000-02	32001-02	32002-02	32003-02	32004-02	32005-02
100 mL/min	C	32000-04	32001-04	32002-04	32003-04	32004-04	32005-04
200 mL/min	SS	32000-06	32001-06	32002-06	32003-06	32004-06	32005-06
300 mL/min	C	32000-08	32001-08	32002-08	32003-08	32004-08	32005-08
500 mL/min	Sa	32030-08	32031-08	32032-08	32033-08	32034-08	32035-08
800 mL/min	G	32030-09	32031-09	32032-09	32033-09	32034-09	32035-09
1.25 LPM	C	32030-10	32031-10	32032-10	32033-10	32034-10	32035-10
2.5 LPM	G	32000-10	32001-10	32002-10	32003-10	32004-10	32005-10
5.0 LPM	Sa	32000-12	32001-12	32002-12	32003-12	32004-12	32005-12
10.0 LPM	G	32000-14	32001-14	32002-14	32003-14	32004-14	32005-14
23 LPM	G	32030-14	32031-14	32032-14	32033-14	32034-14	32035-14
42 LPM	SS	32030-15	32031-15	32032-15	32033-15	32034-15	32035-15
60 LPM	C	32030-16	32031-16	32032-16	32033-16	32034-16	32035-16
2.5 scfh	C	32000-16	32001-16	32002-16	32003-16	32004-16	32005-16
8.25 scfh	G	32000-18	32001-18	32002-18	32003-18	32004-18	32005-18
16.5 scfh	SS	32000-20	32001-20	32002-20	32003-20	32004-20	32005-20
23.0 scfh	C	32000-22	32001-22	32002-22	32003-22	32004-22	32005-22
50.0 scfh	G	32000-24	32001-24	32002-24	32003-24	32004-24	32005-24
94.0 scfh	SS	—	—	—	32003-26	32004-26	32005-26
1.5 scfm	SS	—	—	—	32033-27	32034-27	—
water flow meter
10 mL/min	Sa	32000-28	32001-28	32002-28	32003-28	32004-28	32005-28
20 mL/min	SS	32000-30	32001-30	32002-30	32003-30	32004-30	32005-30
50 mL/min	G	32000-32	32001-32	32002-32	32003-32	32004-32	32005-32
100 mL/min	G	32000-34	32001-34	32002-34	32003-34	32004-34	32005-34
200 mL/min	C	32000-36	32001-36	32002-36	32003-36	32004-36	32005-36
500 mL/min	SS	32000-38	32001-38	32002-38	32003-38	32004-38	32005-38
1.2 LPM	SS	32030-40	32031-40	32032-40	32033-40	32034-40	32035-40
2.0 LPM	T	—	—	—	32033-42	32034-42	32035-42

† For a detailed list of wetted parts, please refer to our parameter table (page 256). ‡ Sa=Sapphire, C=Tungsten Carbide Hard Alloy, SS=316 Stainless Steel, G=Glass, and T=Tantalum