ABB Robot Repair Manufacturer in Guangzhou

ABB Robot Repair Manufacturer in GuangzhouWe mainly undertake controller repair services for welding robots. Including ABB robot power module maintenance, ABB robot servo drive module maintenance, ABB robot manipulator maintenance, etc.

ABB robot repair, repair model:DSQC639 3HAC025097-001， Common faults include the following aspects:

1. ABB robot repair motherboard displays garbled characters after power on;

2. ABB robot is unstable after repair, sometimes black screen, sometimes flashing screen;

3. After ABB robot repair, there is an abnormal communication situation, which will suddenly interrupt the communication connection during the production process;

4. Computer module power warning

Instructions

The actual value of 5V voltage for the computer module power supply is 4.68V, which exceeds the allowable range.

result

Possible reasons

The wiring of the power unit, the input voltage of the power supply, or the output load can all cause voltage abnormalities. Please refer to the circuit diagram for assistance.

solution

Replace the entire computer module unit and restart the system.

5. Alarm message: 37108

Communication interruption: power and computer

Instructions

Communication interruption between the host and control module power supply.

result

The host is unable to retrieve status information or turn off the power. Changes to system data will not be saved after turning off the power.

Possible reasons

The USB cable connecting the host and control module power supply may be damaged or disconnected, or it may be due to a power failure.

solution

Check the power unit and computer module, and replace the faulty unit if necessary.

Urumqi Hohhot Lanzhou Chengdu Kunming Guizhou Chongqing Xi'an Yinchuan Taiyuan Shijiazhuang Zhengzhou WuhanNanning Changsha Nanchang Hangzhou Anhui Hefei Nanjing Shanghai Shenzhen Xiamen Jinan Beijing Tianjin Shenyang Changchun Harbin FuzhouABB Robot Repair Manufacturer in Guangzhou