Vibration fluidized bed dryer

ZLGVibration fluidized bed dryerProduct Features

2.1.1 Structural Features

Driven by a vibration motor, it runs smoothly, produces low noise, has a long lifespan, and is easy to maintain;

- High thermal efficiency, saving more than 30% energy compared to general drying devices, uniform layer temperature distribution, no local overheating phenomenon, uniform fluidization, * phenomenon;

The material indicates minimal damage and can be used for drying fragile materials. Irregular material particles can also be used without affecting the effect;

Adopting a fully enclosed structure, effectively preventing cross contamination between materials and the outside world, ensuring a clean environment and continuous operation;

When used for mass production of high moisture materials, multiple units can be connected in series (such as polyacrylamide, etc.)

Scope of Application

Material conditions
Material name: Sodium sulfate
Dry product output: 305kg/h
Initial moisture content: 3-5% (designed to be 5%)
Final moisture content: ≤ 0.3 (designed to be 0.3%)
Raw material temperature: 20 ℃

Product temperature: around 40 ℃ (cooled)

process conditions
Drying method: Linear vibrating fluidized bed
Contact method between material and hot air: flow-through
Heat source and heating method: saturated steam (0.6Mpa, 165 ℃)

Dry inlet air temperature: 140 ℃
Dry exhaust temperature: 80 ℃
Product discharge method: Host
Dust removal method: cyclone separator+bag filter; Cyclone separator+water film dust collector
Power supply: 380V, 50Hz

Design meteorological conditions
Atmospheric pressure: 101.325KPa
Annual average temperature: 15 ℃
Annual average relative humidity: 70%
Annual average air moisture content: 0.01kg/kg dry air